Preparation of the cotton swab machine

1. Pay attention to whether the suction cup sucks the material smoothly. If the suction is abnormal, stop the machine to check whether the suction block or the suction fan is blocked and clean it in time.

2. Pay attention to whether the suction cup can be neatly put the cotton swab into the combing comb. If the cotton swab cannot be interrupted or frequently, stop the machine immediately to adjust the position of the comb or the suction cup.

3. Pay attention to whether there are irregular cotton swabs on the comb. If there is, remove them quickly and quickly, and put a good cotton swab quickly to ensure the quantity.

4. Always pay attention to whether there are broken bamboo swabs and cotton heads left on the platform under the fixture, and clean up if any.

5. Pay attention to the changes on the control touch screen. If an alarm occurs, stop the machine immediately, and check and deal with the fault indicated by the alarm.

6. Regularly check whether the screws in all parts are loose or shifted.

7. Clean the comb and move the tow slot regularly to avoid the falling cotton swab from breaking the tow bar and the cable or trachea.

8. When cleaning the sanitation under the packaging machine, shut down and clean to avoid equipment failure due to the movement of the comb during the cleaning process.

9. Regularly check whether the oil tank under the gas pressure gauge needs to be refueled, and all moving tracks should be regularly lubricated.

10. When the suction cup moves the screw rod left and right, clean it regularly and add butter.